Intel SBC-455 - Manual (Page 51)

Chapter 3 AMI WinBIOS setup 43
Password Check:
This option enables password checking every time the computer is
powered on or every time WINBIOS Setup is executed. If Always is
chosen, a user password prompt appears every time the computer
is turned on. If Setup is chosen, the password prompt appears if
WINBIOS is executed. The Optimal and Power-On defaults are
Setup.
Parity Check:
Set this option to Enabled to check the parity of all system memory.
The settings are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Disabled.
OS/2 Compatible Mode:
Set this option to Enabled to permit AMIBIOS to run with IBM OS/
2. The settings are Enabled or Disabled. The default settings are
Disabled.
Wait for F1 if Error:
AMIBIOS POST error messages are followed by:
Press to continue
If this option is set to Disabled, AMIBIOS does not wait for you to
press the key after an error message. The settings are
Enabled or Disabled. The Optimal and Fail-Safe default settings
are Enabled.
Hit Del Message Display:
Set this option to Disabled to prevent :
Hit if you want to run Setup
from appearing on the first AMIBIOS screen when the computer
boots. The settings are Enabled or Disabled. The Optimal and
Fail-Safe default settings are Enabled.