Assembly instruction, Exploded diagram – Impex PT-36 User Manual

Page 5

Text mode
Original mode

ASSEMBLY INSTRUCTION

Tools Required to Assemble the Machine: One Adjustable Wrench
STEP 1 (See Exploded Diagram)
A.) Attach three Base Frames (#2) to the Post Frames (#3 & #4). Secure each with one M10 x ¾”

Carriage Bolt (#6),

∅

3/4” Washer (#7), and M10 Aircraft Nut (#8). Do not tighten the Nuts

and Bolts yet.

B.) Connect the three Base Frames (#2) together with a Bracket (#5). Secure them with three

M10 x ¾” Carriage Bolts (#6), Ø ¾” Washers (#7), and M10 Aircraft Nuts (#8).

C.) Place the Cup Holder (#1) onto the top of the three Post Frames. Secure them together with

three M10 x ¾” Carriage Bolts (#6), Ø ¾” Washers (#7), and M10 Aircraft Nuts (#8).

D.) Securely tighten all Nuts and Bolts. Place the Cup (#11) on the top.
E.) Attach eight Spring Clips (#9) to the posts.

EXPLODED DIAGRAM