ICP DAS USA MSM-508FCS - Manual (Page 27)

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual
April 29, 2008 24
Default Setting
This function allows you to clean all settings and load the default value to Switch Management.
Current factory default values are ：
Network Setting
IP Address : 192.168.255.1
Gateway : 192.168.0.1
Mask : 255.255.0.0
Modbus Net ID : 1
Serial Port Setting
COM1 :baudrate 115200,8bit,none patity check, 1 stopbit
COM2 :baudrate 115200,8bit,none patity check, 1 stopbit
Redundant Setting
Ring Pair 1 : disabled
Ring Pair 2 : disabled
Protocol : Cyber-Ring Protocol
Ring Coupling : Primary Switch
Recovery Time : 300ms
Reboot Setting
When you finish the Network Setting, you have to reboot the Switch to activate the value, you
can restart the system by clicking following reboot icon.