IBM 2193 - Manual (Page 8)

viii IBM Personal Computer User Guide
Removing the top cover ........................................................................ 7-5
Looking inside the system unit ...................................................................... 7-7
Chapter 8. Adding and removing adapter cards and drives ................... 8-1
Resolving conflicts with installed adapter cards ............................................ 8-2
Setting modem card configurations ...................................................... 8-2
Working with the hardware in the system unit ............................................... 8-3
Adding and removing adapter cards ............................................................. 8-4
Installing adapter cards ........................................................................ 8-4
Removing adapter cards ...................................................................... 8-5
Removing and adding drives ......................................................................... 8-6
Identifying signal cable connectors ....................................................... 8-6
Removing the diskette drive ................................................................. 8-10
Removing the CD-ROM drive ............................................................... 8-11
Removing the hard disk drive ............................................................... 8-12
Installing a drive in Bay 2 ...................................................................... 8-13
Updating the CMOS settings in Setup ........................................................... 8-15
For adapter cards ................................................................................. 8-15
For Drives ............................................................................................. 8-15
Chapter 9. Adding and replacing system board components ................ 9-1
Identifying system board parts (machine type 2193) ..................................... 9-2
Locating system board jumpers and connectors (machine type 2193) ......... 9-4
Identifying system board parts (machine type 2194 and 6345) .................... 9-5
Locating system board jumpers and connectors (machine type 2194 or
6345) ............................................................................................................. 9-7
Card connector and jumper information ........................................................ 9-8
Identifying adapter card connectors ..................................................... 9-8
Setting a jumper ................................................................................... 9-8
Upgrading the system memory ..................................................................... 9-9
Installing memory modules ................................................................... 9-9
Removing memory modules ................................................................. 9-10
Verifying the system memory ............................................................... 9-10
Replacing the system battery ........................................................................ 9-11
Updating the CMOS settings in Setup ........................................................... 9-13