Assembly instruction, Diagram 1 – Impex BF-1201 User Manual

Page 6

Text mode
Original mode

ASSEMBLY INSTRUCTION

Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided
by manufacturer.
NOTE: It is strongly recommended that two or more people assemble this machine to avoid
possible injury.

STEP 1 (See Diagram1)

A.)

Do not tighten the Nuts and Bolts until instructed to do so.

B.) Attach the Front Stabilizer (#39) to the Main Frame (#32). Secure it with two M8 x 2 ½” Carriage Bolts

(#35), two

 5/8” Curved Washers (#24), and two M8 Acorn Nuts (#37).

C.) Attach the Rear Stabilizer (#36) to the Main Frame. Secure it with two M8 x 2 ½” Carriage Bolts (#35),

two

 5/8” Curved Washers (#24), and two M8 Acorn Nuts (#37).

D.)

Securely tighten all Nuts and Bolts installed.

DIAGRAM 1