IBM L170p User Manual
Page 29
27
DE
UTSC
H
ENG
L
IS
H
FRANÇA
IS
E
S
P
AÑOL
IT
ALIANO
JA
P
A
NE
SE
COMPL &
W
ARR
Screen is blank
and power
indicator is
steady green
Brightness
and Contrast
may be too
low
Adjust brightness and
contrast.
User
controls
section on
page 18
Screen is blank
and power
indicator is
steady amber
The monitor is
in the Power
Management
Standby state
Press any key on the
keyboard or move the
mouse to restore
operation.
Check the Power
Management software on
your computer
Power
Management
section on
page 25
The monitor is
not receiving
a video signal
Check that the signal
cable is firmly connected to
the computer.
Check that no pins are
bent in the signal cable
connector.
Connecting
your Monitor
for Analog
section on
page 6
The monitor is
in the Power
Management
Suspend or
Off state
Press any key on the
keyboard or move the
mouse to restore
operation.
Check the Power
Management software on
your computer.
Power
Management
section on
page 25
Screen is blank
and power
indicator is
Flashing green
every 0.5
second
Display mode
of the
computer is
outside the
range of the
monitor
Reconfigure the
computer to use a
supported display mode.
Further
Information
section on
page 23
Image appears
to be smeared
There are
noises in the
video signal
Select Image Setup
menu in the OSD. Then
select MANUAL to adjust
Phase/Clock settings.
User
controls
section on
page 18
Image appears
to be
discolored
The Color
setting may
be incorrect
Adjust the Color
settings.
User
controls
section on
page 18
Problem
Possible
Cause
Suggested Action
Reference
L170p_E.fm Page 27 Monday, February 24, 2003 11:12 PM