Impex MARCY TPL-48 - Manual (Page 2)

SAVE THESE INSTRUCTIONS.
Impex Fitness Products
14777 Don Julian Road
City Of Industry, CA 91746 Phone: 1-800-999-8899
Fax: (626) 961-9966
Email: [email protected]
06-10-08
ASSEMBLY INSTRUCTION
Step-1
Turn the Jumping Surface (#1) over. There are
plastic caps covering the threaded connector
where the Legs will mount on.
Remove these caps and discard.
Step-2
Insert the Leg (#2) through the sleeve on
the Handrail Support (#3), and then
firmly thread the Leg onto the
threaded connector.
Skip the next open connector and repeat
same procedure to mount the other
Balance Bar Support and Leg onto
the 3
rd
open threaded connector.
Step-3
Firmly thread the other six Legs (#2) onto
the remaining six open threaded
connectors.