IBM SG24-4576-00 - Manual (Page 139)

A screen like the one in Figure 79 on page 126 will appear. This is
where the context for the server will be defined.
Figure 79. Assigning a Context for the Server
h. Specify the server context and type an administrator password.
i. Retype the administrator password.
j. Select Yes when the system asks you to save the directory information.
A screen like the one in Figure 80 will appear. All the information that
you have previously entered for NetWare Directory Services is shown in
this screen.
Attention
Be sure to remember this information. You will need the context of
the server to log on as well as to perform many administrator and
end-user tasks. Please also remember that the context is
case-sensitive.
Figure 80. Server Context Information.
k. Check the directory information and then press Enter.
l. Press Esc twice and select Yes to exit the installation utility.
126
NetWare Integration Guide