Assembly instruction, Diagram 1 – Impex PHC-PWR9 User Manual

Page 6

Text mode
Original mode

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended this machine be assembled by two or
more people to avoid possible injury.

STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#1) to the Front & Rear Stabilizers (#2 & 3). Secure each end

with two M10 x ¾” Allen Bolts (#36) and

∅

¾” Washers (#42). Attach a Lock Knob (#23)

to the hole underneath the Main Frame.

B.) Slide the Sliding Block (#8) onto the Incline Adjustment Bar (#9). Align the hole then

secure it with a Lock Knob (#23) to hold the Sliding Block in position.

C.) Attach the Incline Adjustment Bar to the brackets on the Main Frame. Secure each end

with one M10 x 2 ½” Carriage Bolt (#35),

∅

¾” Washer (#42), and M10 Aircraft Nut (#44).

DIAGRAM 1