Diagram 3 – Impex SM-6001 User Manual

Page 25

Text mode
Original mode

STEP 3 (See Diagram 3)

A.) Align the bracket on the Backrest Adjustment Support (#9) in between the two

Backrest Supports (#4). Secure it with four M8 x 1 5/8” Allen Bolts (#37), eight Ø 5/8”
Washers (#32), and four M8 Aircraft Nuts (#34). Do not tighten the Nuts and Bolts yet.

B.) Insert the Backrest Adjustment Support (#9) into the opening on the Main Frame (#1).

Press or step down on the Backrest Adjustment Lever (#10) to allow the Support to go
through.

C.) Attach the bottom side-holes on the Backrest Supports (#4) to the pivot on the Main

Frame. Secure it with one M10 x 6 ½” Allen Bolt (#40), two Ø ¾” Washers (#33), and
one M10 Aircraft Nut (#35).

D.) Securely tighten all Nuts and Bolts installed.

DIAGRAM 3