Impex CB-181 - Manual (Page 7)

STEP 2 (See Diagram 2)
A.) Attach the Main Seat Support (#4) to the Front Post (#5). Secure it with two M10 x
2 ¼” Hex Bolts (#22), one 1 ½” x 4 ½” Bracket (#11), four Ø ¾” Washers (#26), and
two M10 Aircraft Nuts (#30).
B.) Attach the Main Seat Support to the Cross Brace (#3). Secure it with two M10 x 2
¼” Hex Bolts (#22), one 1 ½” x 4 ½” Bracket (#11), four Ø ¾” Washers (#26), and
two M10 Aircraft Nuts (#30).
C.) Securely tighten all Nuts and Bolts installed in Step-1 and Step-2.
DIAGRAM 2
6