Impex IGS-4350 - Manual (Page 15)

STEP 7 (See Diagram 7 & Cable Loop Diagram)
A.) Attach one end of the 87” Butterfly Cable (#42) to the clip on the Right Butterfly (#11). Draw
the Cable to the right Swivel Pulley Bracket (#20).
B.) Attach a Pulley (#57) to the Bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#69), two Ø
¾” Washers (#66), and one M10 Aircraft Nut (#86).
C.) Draw the Cable around the Pulley then downward. Attach the Cable to a Single Floating
Pulley Bracket (#19). Repeat Procedure B above to install a Pulley. Let the Bracket hanging
for now.
D.) Draw the Cable upward to the left Swivel Pulley Bracket. Repeat Procedure B above to
install another Pulley.
E.) Draw the Cable around the Pulley they clip it to the Left Butterfly.
DIAGRAM 7
14