IBM G94 - Manual (Page 9)

Setup
Important: Before connecting the monitor, turn off the computer
and attached devices. Also ensure the power at the electrical
outlet matches the power requirements of the monitor. Refer to
the
Specifications section on page 18 for more details.
Attaching the Stand
Your monitor is designed to sit on a stand, which is supplied
separately. The interface for this stand is packed with your
monitor and is fitted as follows.
1. Place the monitor face down on a soft surface to prevent the
screen being scratched.
2. Insert the hooks (1) into the matching slots on the underside
of the monitor (2).
3. Slide the base towards the front of the monitor until the
latch (3) clicks into the locked position.
2