Intel D815EPEA2 - Manual (Page 4)

Ordering Information—See Intel’s Web site at www.intel.com
For the most current product information, visit Intel’s Web site at:
www.intel.com or program.intel.com/ibp/products/boards/
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual
property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability
whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in
medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
The Intel ® Desktop Boards D815EEA2 and D815EPEA2 may contain design defects or errors known as errata which may cause the product to deviate
from published specifications. Current characterized errata are available on request.
*Third-party brands and names are the property of their respective owners.
© 2001 Intel Corporation. All rights reserved.
0201/TB/RN
Processor
Processors Intel ® Pentium ® III processors with 133/100-MHz
Supported system bus in the FC-PGA package
Intel ® Celeron ™ processors with 100/66-MHz
system bus in the FC-PGA package
Chipset Options
Intel ® 815E Chipset Intel ® 82815 Graphics and Memory
(D815EEA2) Controller Hub (GMCH) with AHA
(Accelerated Hub Architecture) bus
I/O Controller Hub (ICH2) with AHA bus
Firmware Hub (FWH)
Intel ® 815EP Chipset Intel ® 8215EP Memory Controller Hub (MCH)
(D815EPEA2) with AHA (Accelerated Hub Architecture) bus
I/O Controller Hub (ICH2) with AHA bus
Firmware Hub (FWH)
Graphics/Memory Controller Hub (GMCH)
Accelerated Graphics Integrated Intel ® 3D Graphics with support for
(D815EEA2) additional 4 MB of Digital Display cache memory
with GPA
Includes Digital Video Output (DVO) header
• Support for Digital Visual Interface
(DVI) and TV output
Supports 1x, 2x and 4x AGP 2.0 compliant
graphics cards
I/O Controller Hub (ICH2)
ICH2 I/O Ultra DMA/33
Controller Hub Ultra ATA/100/66
Six PCI request-grant pairs for support of
six PCI Bus Masters
I/O Features Integrated Super I/O LPC bus controller
Five PCI Local Bus slots
Power Management support for both ACPI
1.0 & APM 1.2
PC 99 and PC 99A Compliance
USB Two USB controllers with four USB ports
(Two dual stacked rear USB connectors)
Firmware Hub
System BIOS 4-Mb Flash EEPROM with Intel/AMI* BIOS
featuring Plug and Play, IDE drive auto-configure,
Advanced Power Management (APM) 1.2,
ACPI 1.0, DMI 2.0, Multilingual support
Intel ® Rapid Optimized system initialization delivering
BIOS Boot faster access to PC from power-on
System Memory
Memory Capacity Three 168-pin unbuffered DIMM sockets
for 32 MB (min) to 512 MB (max) SDRAM
Memory Type PC100, 100-MHz both ECC and non-ECC
(all system bus speeds) PC133, 133-MHz
accepts both ECC and non-ECC
(133-MHz system bus only)
Memory Voltage 3.3V
Audio
AC’97 integrated audio using the AD1885 codec
LAN
Intel ® PRO/100 Network Connection (integrated
LAN; optional) RJ-45 connector with link and
speed LEDs
Auto-negotiation of 10 BaseT and 100 BaseTX
Hardware Management Features
Voltage sensor to detect out of range values
Two fan sensors used to monitor temperature
and fan activity
Wake on LAN* (WOL)
Wired for Management (WfM) 2.0 compliant
Support for system wake up using an add-in
network interface card with remote wake up
capability, integrated 82562ET network adapter,
or PCI Slot 2
Expansion Capabilities
Five PCI bus add-in card connectors (PCI)
Local Bus Specification Revision 2.2
One Communication and Networking Riser (CNR)
connector shared with PCI slot 5 (optional)
One universal AGP Port connector
Jumpers and Front Panel Connectors
Jumpers Three-pin jumper block to set configuration
mode for the BIOS Setup program
Front Panel Reset, HD LED, Power LEDs, Power On/Off,
Connector Standby header, IR Port, Aux LED
Mechanical
Board Style ATX mounting holes and external connector
placement
Board Size 11.5" x 8.2"
Environment
Operating Temp. 0° C to +55° C
Storage Temp. -40° C to +70° C
Regulations
Korean MIC mark and certification number
Safety Regulations
U.S. and Canada UL 1950—CSA 950-95,
U.S. and Canadian recognition
component marks
Europe Classified to IEC 950
EMI/RFI Regulations Intended for use in systems meeting the
following EMI/RFI regulations:
U.S. FCC Class B (DofC—Cover off testing)
Canada IC Class B
Europe EU Class B (Res, Com, Light Industry)
Japan VCCI, Class B (ITE)
EEA (European Economic Area)
EN55022: 1998, uses CISPR 22 3rd edition
Power requirements vary with system
configuration and use. Complies with US CRF
via EN55022 + 6db in an open chassis and
EU Directive 89/336/EEC via EN55022 and
EN50082-1 in a representative chassis.
Intel ® Desktop Boards D815EEA2 and D815EPEA2 Specifications