Impex PL 10510 - Manual (Page 6)

STEP 2 (See Diagram 2)
A.) Insert the Axle (# 4) into the Pivot on the Main Frame (#1). Attach the Left and Right
Handlebars (#2) & (#31) onto the Axle from both sides. Secure the Axle with two
∅
7/8” Washers (#7) and M8 Nylon Nuts (#8). Close both ends with two plastic Axle End
Caps (#9).
B.) Insert the Lower Handlebar (#3) into the Left Handlebar (#2). Secure it with two M6 x
5/8” Allen Bolts (#6) and
∅
½” Washers (#5). Repeat same procedure to install the
other side.
DIAGRAM 2
5