Ives Offset Top Pivot 7222 - Manual (Page 2)

Pivot Base
Door Leaf
9/16”
14 mm 1-1/8”
29 mm
16001 Rev. 4
Depth of mortise will vary
depending upon installation
and/or threshold height. * 3/8”
10 mm * 15/16”
24 mm *
to
It is very important for installer to verify that center line of
top pivot point lines up with center line of bottom pivot
point before final installation. Heel edge of door must be
beveled 1/8” in 2” as shown below.
NOTE !
Bevel heel edge of door
1/8” in 2” with 3/16” rad, typ
3/4”
19 mm
3/4”
19 mm
16001-00