3 installing a ddr2 dimm, Locate the dimm socket on the board, Installing a ddr2 dimm – Intel EMX-965GME User Manual

Page 25

Text mode
Original mode

User’s Manual

EMX-965GME

1.5.3

Installing a DDR2 DIMM

Make sure to unplug the power supply before adding or removing
DIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.

1. Locate the DIMM socket on the board.
2. Hold two edges of the DIMM module carefully, and keep away of touching its

connectors.

3. Align the notch key on the module with the rib on the slot.
4. Firmly press the modules into the socket automatically snaps into the mounting notch.

Do not force the DIMM module in with extra force as the DIMM module only fit in one
direction.

A DDR2 DIMM is keyed with a notch so that it fits in only one

direction. DO NOT force a DIMM into a socket to avoid damaging
the DIMM.

The DDR2 DIMM sockets do not support DDR DIMMs. DO NOT

install DDR DIMMs to the DDR2 DIMM socket.