IBM NETVISTA X40 6643 - Manual (Page 68)

Code Description Action
161 Defective CMOS Battery Replace the battery. See “Replacing the
battery” on page 68.
162 A change in the device
configuration occurred Go to “Starting and using the
Configuration/Setup Utility program”
on page 31, and follow the
instructions to load the Default
Settings.
If the problem persists, have the
computer serviced.
163 Clock not updating Go to “Starting and using the
Configuration/Setup Utility program”
on page 31, and follow the
instructions to reset the time and date.
If the problem persists, have the
computer serviced.
164 CMOS RAM memory size does not
match This is expected if you have removed
memory. Otherwise, Go to “Running
the IBM Enhanced Diagnostics
program” on page 67 for instructions
on running memory diagnostics.
301 Keyboard error
1. Make sure the keyboard is
properly connected.
2. If the keyboard is properly
connected, have the computer
serviced.
662 Diskette drive configuration error
1. Go to “Starting and using the
Configuration/Setup Utility
program” on page 31, and follow
the instructions to verify the
diskette drive configuration.
2. Run the diagnostic program for the
diskette drive. See “Running the
IBM Enhanced Diagnostics
program” on page 67.
3. If the problem persists, have the
computer serviced.
1762 Hard disk configuration error
1. Go to “Starting and using the
Configuration/Setup Utility
program” on page 31, and follow
the instructions to verify the hard
disk configuration.
2. If the problem persists, have the
computer serviced.
52 User Guide