Intermate 100 - Manual (Page 97)

Intermate100 and Intermate101 Print Server Administration Manual 97
IP Assignments for Initial Contact: Assignment Using DHCP
12.6. Assignment Using DHCP
1 You must first assign an address statically using ARP and
PING or the IMCU, as described in one of the sections
below. When you continue from there, do the following:
2 Connect and Login to the unit with the tool of your choice.
3 Choose [TCP/IP].
a Disable BOOTP and RARP. Enable DHCP.
b If it is not possible for Intermate1xx to obtain
the mask from the network, you must type in a
Subnet Mask.
c If automatic routing (RIP) is not used in your
environment, type in the Default Gateway.
d Fill out a host name as described on “Host
Name:” [page 89] .
4 Save your work and reboot. You can, of course, wait to
reboot until finishing other configurations you want to make.
5 Remember to coordinate things with your network
administrator so that the host name gets registered in an
appropriate DNS table.