Intermate 100 - Manual (Page 210)

Intermate100 and Intermate101 Print Server Administration Manual 210
Using FTP Directly: The Binary Configuration File (ima_config.bin)
To store (load) to the print server
1 Start an FTP session to the print server you want to transfer
settings to
ftp 192.168.0.170
2 Give the user name and password for the print server.
3 Change to the CONFIG library.
cd Config (case sensitive in G32 )
4 Change to binary transfer mode.
binary
5 Store the binary configuration file
Syntax: put .
The file name in the part of the command must
match the case of the file name on your PC.
The file must have the same name when it is “put” on the
target, so prevent typographical errors by not specifying a
name for the .
Example:
put C:\PrintServerConfigs\ima_cfg.bin
6 Continue as described in steps 8 - 10 on page 207 .