Bench assembly instruction, Diagram 1 – Impex MD-8850 User Manual

Page 19

Text mode
Original mode

BENCH ASSEMBLY INSTRUCTION

STEP 1 (See Diagram 1)

A.) Attach the Bench Base Frame (#6) to the Rear Stabilizer (#7). Secure the side-holes

with two M10 x 4” Carriage Bolts (#41), two Ø ¾” Washers (#31), and two M10
Aircraft Nuts (#33). Secure the top hole with one M10 x 5/8” Allen Bolt (#36) and one
Ø ¾” Washer (#31).

B.) Attach the Wheel Set (#25) to the bracket on Rear Stabilizer. Secure it with one M8 x

5 1/8” Allen Bolt (#35), two Ø 5/8” Washers (#30), and one M8 Aircraft Nut (#32)

DIAGRAM 1