Insignia NS-FTV27 - Manual (Page 18)

17
NS-FTV27 27-inch Flat Stereo Color TV
www.insignia-products.com
Specifications
Design and specifications are subject to change
without notice.
Troubleshooting
Use the following checklist for troubleshooting
when you have problems with your television.
Consult your local dealer or service outlet if
problems persist. Be sure all connections are
properly made when using with other units.
Power supply AC 120V, 60 Hz
Power Consumption
Operation 110 Watts
Standby 3 Watts
Chassis Construction
Weight 88.2 lbs. (40.0 kg)
Width 29-1/8 inches (740 mm)
Height 22-5/8 inches (575 mm)
Depth 19-7/16 inches (494.5 mm)
Inputs
VIDEO 1 V (p-p)/75 ohms
AUDIO –8 dBm/50k ohms
S-VIDEO Y: 1 V (p-p), 75 ohms
C: 0.286 V (p-p), 75 ohms
COMPONENT Y: 1 V (p-p), 75 ohms
PR: 0.7 V (p-p), 75 ohms
PB: 0.7 V (p-p), 75 ohms
Output
DIGITAL AUDIO 0.5 V (p-p), 75 ohms
Other
Antenna input VHF/UHF/CABLE In 75 ohm
coaxial
Picture tube 27 inches (676.0 mm diagonal)
Tuner type Quartz PLL frequency
synthesized
Receiving channels VHF 2-13
UHF 14-69
CABLE TV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
Speakers 1-13/16 inches (45.7 mm) x
3-7/8 inches (99.1 mm), 8 ohm
x 2
Sound output power 1.0 W + 1.0 W
Problem Solution
Television does not
operate. • Make sure the power cord is
plugged in.
• Try another AC outlet.
• Power is off. Check fuse or
circuit breaker.
• Unplug television for an hour,
then plug it back in.
Poor sound or no
sound. • Station or cable experiencing
problems. Tune to another
station.
• Check sound adjustments
(volume and mute).
• Check for sources of possible
interference.
Poor picture or no
picture. • Station or cable experiencing
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Check antenna or cable
connections. Adjust the
antenna.
• Check for sources of possible
interference.
• Check picture control
adjustments.
Poor reception on
some channels. • Station or cable experiencing
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Station is weak. Adjust the
antenna to receive the desired
station.
• Check for sources of possible
interference.
Poor color or no
color. • Station or cable experiencing
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Check picture control
adjustments.
• Check antenna or cable
connections. Adjust the
antenna.
• Check for sources of possible
interference.
Picture wobbles or
drifts. • Station or cable experiencing
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Cable company is scrambling
signal.
• Adjust antenna.
Digital
broadcasting
screen problem. • Check digital signal strength.
No CATV
reception. • Check all cable connections.
• Set TV/CABLE menu option to
the CABLE mode.
• Station or cable system
problems. Try another station.
Horizontal or
diagonal bars on
screen. • Check antenna connections.
• Adjust or re-direct antenna.
• Check for sources of possible
interference.