Insignia IS-HTIB102731 - Manual (Page 8)

8
English
25 REPEAT
Press to select variations of continuous play.
26 EQ
Press to select each of the EQ effect for en-
hanced tones.
27 SURROUND
To select multichannel surround (Dolby Digi-
tal, DTS or stereo) sound effect.
28 ANGLE
Press to change the angles.
29 ZOOM
Enlarge the picture.
30 DIM
To select different brightness for the VFD.
31 NIGHT
Press to activate or deactivate night function.
Remote Control
Function Overview
Inserting Batteries into the
Remote Control
1. Open the battery compartment.
2. Place the batteries (2x size AAA) in the com-
partment with the correct polarity as indicated
by “+ ”and “- ”symbols.
3. Close the cover.
Notes:
Remove batteries if they are exhausted or will
not be used for a long time.
Do not mix old and new or different types of
batteries.
Batteries contain chemical substances, so they
should be disposed off properly.