Intel GA-G31M-S2L - Manual (Page 13)

Hardware Installation - 13 -
Internal Connectors Š 1 x 24-pin ATX main power connector
Š 1 x 4-pin ATX 12V power connector
Š 1 x floppy disk drive connector
Š 1 x IDE connector
Š 4 x SATA 3Gb/s connectors
Š 1 x CPU fan header
Š 1 x system fan header
Š 1 x front panel header
Š 1 x front panel audio header
Š 1 x CD In connector
Š 1 x S/PDIF Out header
Š 2 x USB 2.0/1.1 headers
Š 1 x chassis intrusion header
Š 1 x power LED header
Back Panel Š 1 x PS/2 keyboard port
Connectors Š 1 x PS/2 mouse port
Š 1 x parallel port
Š 1 x serial port
Š 1 x D-Sub port
Š 4 x USB 2.0/1.1 ports
Š 1 x RJ-45 port
Š 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller Š iTE IT8718 chip
Hardware Monitor Š System voltage detection
Š CPU temperature detection
Š CPU/System fan speed detection
Š CPU overheating warning
Š CPU/System fan fail warning
Š CPU fan speed control
BIOS Š 1 x 4 Mbit flash
Š Use of licensed AWARD BIOS
Š PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b