IBM Computer Monitor - Manual (Page 13)

4. When the Update Device Driver Wizard window opens, select
"Display a list of all the drivers in a specific location, so you can
select the driver you want," and click Next>.
5. Insert the the Device driver and User’s Guide CD into the
computer CD- ROM drive, then click Have Disk.
6. Type d:\ (change the drive letter to match your CD-ROM drive if it
is not drive D) in the Copy manufacturer's files from: box, then
click OK.
7. Click Next>, Next>, and then Finish to complete the installation.
8. Close the Display Properties window.
9. Remove the User’s Guide and Installation Files CD from the
computer CD-ROM drive.
Installing the Windows 2000 device driver
To manually install or update the device driver for the Microsoft
Windows 2000 Professional operating system, perform the following
steps:
1. Click
Start → → → → Settings → → → → Control Panel and then double-click
Display.
2. In the Display Properties window, click the Settings tab, and then
click Advanced.
3. Click the Monitor tab, and then click Properties → → → → Driver → → → →
Update Driver.
4. When the Update Device Driver Wizard window opens, select
"Search for a suitable driver for my device," and click Next>.
5. Insert the Device Driver and User’s Guide CD into the computer
CD-ROM drive, type d:\ (change the drive letter to match your CD-
ROM drive if it is not drive D) in the Copy manufacturer's files
from: box, click Next> and then Finish to complete the installation.
6. Close the Display Properties window.
7. Remove the User’s Guide and Installation Files CD from the
computer CD-ROM drive.
8