Section 12—clutch/motor lock, Engaging/disengaging the clutches, Engaging/disengaging the clutches on – Invacare Wheelchair XP6500 User Manual
Page 56
56
Part No. 1123839
SECTION 12—CLUTCH/MOTOR LOCK
SECTION 12—CLUTCH/MOTOR
LOCK
ƽ WARNING
After ANY adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Engaging/Disengaging the Clutches
ƽ WARNING
DO NOT engage or disengage the clutches until the power is Off.
NOTE: For this procedure, refer to FIGURE 12.1.
The clutch engagement/disengagement allows freewheeling or joystick controlled
operation. Freewheeling allows an attendant to maneuver the wheelchair without power.
To engage/disengage the clutches:
1. Locate the clutch handles on motors.
ƽ WARNING
If clutch handles are forced to engage in the wrong direction as shown in
FIGURE 12.1, the motors will be damaged and will need to be replaced.
2. Perform one of the following:
• To Engage: turn the clutch handles until they are pointing towards the rear of the
wheelchair. NEVER try to turn the clutch handles towards the front of the wheelchair.
• To Disengage: turn the clutch handles until they are pointing towards the rear wheels.
NEVER try to turn the clutch handles towards the inside of the wheelchair.
FIGURE 12.1 Engaging/Disengaging the Clutches
Disengaged (Toward Rrear Wheels)
Top View Of Wheelchair
Clutch Handle
Clutch Handle
NOTE: NEVER force clutch
handles in these directions.
Engaged
(Toward Rrear
of Wheelchair)