Diagram 4 – Impex MWB 214 User Manual

Page 9

STEP 4 (See Diagram 4)

A.) Attach the side-holes on the two Backrest Supports (#7) to the pivot on the Main

Seat Support (#3). Place the other end of the Backrest Supports against the
Backrest Adjustment Bar (#11).

B.) Attach the Backrest Board (#8) to the Backrest Supports. Secure it with four M6 x 1

5/8” Hex Bolts (#23) and Ø ½” Washers (#25).

C.) Place the Seat Pad (#9) onto the Main Seat Support. Secure it with four M6 x 5/8”

Hex Bolts (#22) and Ø ½” Washers (#25).

DIAGRAM 4