Intel SE7320 - Manual (Page 19)

Configuring the Serial/Modem Channel
This option allows the setup of a modem on the Serial Channel (default channel 4). Information on
the modem’s strings is required and 3 screens are used to cover the options.
• The first screen sets data specific to configuring the modem.
• The second screen sets data specific to the access modes.
• The last screen sets data specific to paging, if paging is desired for alerting from this server.
Serial/Modem Screen 1 – Modem Setup
Figure 15. Serial 1 – Modem Configuration
Accept defaults or provide the required modem strings:
• ESC Sequence: Max 5 characters, first string sent to clarify modem communication.
• Hang up String: Terminates session. Max 7 characters with an automatic ‘Enter’ added by the
BMC.
• Modem Init String: Initializes channel connection.
• Modem Dial Command: ATD for tone dial.
• Modem Ring Time: Number of rings
‘Continue’ will not be available until all settings are entered.
19