IBM 2785+01 - Manual (Page 7)

Family 2785+01 IBM Infoprint 2085
First Print Out Times (FPOT)
First print-out time is the time from when the printer receives a start printing signal in "READY" state until one sheet of paper is printed
and delivered. The printer is in READY state <360 seconds after it is powered on at rated voltage.
The minimum engine first print out time for Infoprint 2085 and 2105 are listed below. These times in seconds represent A4 and letter
paper from tray 1 (letter) and tray 2 (A4) with no duplex, stapling or punching.
●
Infoprint 2085:
Media Shift Bin
------------------- ---------
Letter LEF (tray 1) 6.2 sec
A4 LEF (tray 2) 6.6 sec
Note: LEF = Long Edge Feed.
●
Infoprint 2105:
Media Shift Bin
------------------- ---------
Letter LEF (tray 1) 5.8 sec
A4 LEF (tray 2) 5.8 sec
Note: LEF = Long Edge Feed.
First Copy Times
First copy times is with the copier in "READY" state, originals in the ARDF and copy media in tray 1. This represents the time from the
user pressing the "START" button until the first simplex copy is delivered.
●
Infoprint 2085:
Proof Bin Shift Bin
Media Face-Up Face-Down Face-Up Face-Down
---------- -------- --------- -------- ---------
A4 LEF 4.1 sec 5.4 sec 4.4 sec 5.6 sec
Letter LEF 4.1 sec 5.4 sec 4.4 sec 5.7 sec
Note: LEF = Long Edge Feed.
●
Infoprint 2105:
Proof Bin Shift Bin
Media Face-Up Face-Down Face-Up Face-Down
---------- -------- --------- -------- ---------
A4 LEF 3.7 sec 4.7 sec 3.9 sec 5.1 sec
Letter LEF 3.7 sec 4.8 sec 3.9 sec 5.1 sec
Note: LEF = Long Edge Feed.
Copying Capability
http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (7 of 47)5/25/2005 7:01:07 AM