Assembly instruction, Diagram 1 – Impex IGS-02 User Manual

Page 5

Text mode
Original mode

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Adjustable Wrench and Allen
Wrench
NOTE: It is strongly recommended this machine to be assembled by two or
more people to avoid possible injury.

STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#33) to the Rear Stabilizer (#22). Secure it with two M10

x 3 ½” Carriage Bolts (#23),

∅

¾” Washers (#5) and M10 Aircraft Nuts (#30).

Repeat the same step to install the Front Stabilizer (#38).

B.) Attach the Seat Pad (#17) to the Seat Support (#18). Secure it with two M8 x 1

3/8” Allen Bolts (#45) and

∅

½” Washers (#15). Attach the Seat Frame (#18) to

the Main Frame (#33). Secure it with two M10 x 3 ¾” Carriage Bolts (#29),

∅

¾”

Washers (#5) and M10 Aircraft Nuts (#30).

C.) Attach the Foot Plate (#31) to the Main Frame (#33). Secure it with three M10 x

1” Allen Bolts (#11) and

∅

¾” Washers (#5).

DIAGRAM 1