ICP DAS USA SAGP-845EV - Manual (Page 60)

60
9. Your second option, in sequence, will be whether you want to
flash your BIOS. Enter Y (for "yes").
NOTE:
This is the critical step. Once you kit the enter key, do
NOT touch the keyboard, the reset button, or power
switch while the flashing is in progress. There will be
bar progressing across the screen while the flashing is
progressing.
10. When the flashing process is complete, you will be asked to
reset or power off the system. Remove the floppy diskette from
the floppy drive and either hit the reset button or the power
button.
11. Reboot the system and note that the BIOS version on the
initial boot-up screen has changed to the new BIOS version.
Your BIOS upgrade is now complete.
Recovering the previous BIOS:
1. Assuming you have the floppy made during the upgrade
procedure noted above, boot the system with that diskette in
the floppy drive. If you do not have floppy made during the
upgrade procedure noted above, you will need to repeat steps
1 though 3 (above) for the version of the BIOS you wish to
recover to.
2. Complete steps 4, 5, 6B, 9, 10, and 11 (above) substituting the
name of the BIOS you wish to recover for the upgrade BIOS at
step 5.