ICP DAS USA SAGP-845EV - Manual (Page 45)

45
Power Management
This category allows the user to select the type (or degree) of power
saving related to the following modes:
1. HDD Power Down
2. Doze
Mode
3. Suspend Mode
There are four selections for Power Management, three of which have
fixed mode settings.
Disable (default)
No power management. Disables all four modes
Min. Power Saving z Minimum power management
z Doze Mode = 1 hr.
z Standby Mode = 1 hr.
z Suspend Mode = 1 hr.
z HDD Power Down = 15 min.
Max. Power Saving z Maximum power management -- ONLY
AVAILABLE FOR SL CPU’s
z Doze Mode = 1 min.
z Standby Mode = 1 min.
z Suspend Mode = 1 min.
z HDD Power Down = 1 min.
User Defined z Allows the user to set each mode individually.
z If it’s not disabled, each of the ranges is from 1
min. to 1 hr. except for HDD Power Down whose
ranges from 1 min. to 15 min. and disable.
Video Off Method
This determines the manner of how the monitor becomes blank.
V/H SYNC+Blank
This selection will cause the system to turn
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video
buffer.
DPMS Initial display power management signaling.
Video Off In Suspend
This determines the manner in which the monitor is blanked.
The choice: Yes, No.