ICP DAS USA SAGP-845EV - Manual (Page 53)

53
and at entry to Setup. If it is set to “Setup”, the password is needed only
when trying to enter Setup.
4.15 Exit Selecting
Save & Exit Setup
Pressing on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing “Y” stores the selections made in the menus in CMOS –
a special section of memory that stays on after the system has
been turned off. When the computer reboots again, the BIOS
configures the system according to the Setup selections stored in
CMOS.
Exit Without Saving
Pressing on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows the user to exit Setup without saving any changes in
CMOS. The previous selections remain in effect. This exits the
Setup utility and restarts the computer.