IBM 22P6972 - Manual (Page 23)

Appendix A. Product specifications
This appendix includes the following information:
v
Physical specifications
v Power requirements
v Environmental requirements
v Read speeds
v Write speeds
Physical specifications
The physical specifications 1 of the drive are listed in the following table.
Physical specification
Height 42 mm (1.7 in.)
Width 148 mm (5.8 in.)
Length 185 mm (7.3 in.)
Weight 830 g (1.8 lb.)
Power requirements
The following table lists the power specifications by voltage level for the drive. The power specifications
are measured at the drive power connector and are nominal values.
Power specifications Voltage Average Maximum
At voltage 5V dc 800 mA 1.5 A
At voltage 12V dc 1000 mA 1.8 A
Environmental requirements
Specification Operational Nonoperational
Temperature (noncondensing) +5° C to +45° C
(+41° F to +113° F)
-20° C to +60° C
(-4° F to 140° F)
Relative humidity (noncondensing) 15% to 85% 10% to 90%
1. Product-description data represents IBM’s design objectives and is provided for comparative purposes; actual results might vary
based on a variety of factors. This product data does not constitute a warranty. Data is subject to change without notice.
© Copyright IBM Corp. 2002 A-1