IBM 802.11g Wireless Broadband Router WRT-410 - Manual (Page 34)

- 29 -
Save Settings: Click to save the current configuration as a profile that you can load when necessary.
Load Settings: Click “Browse” and go to the location of a stored profile. Click Load to load the profile's
settings.
Restore Factory Default Settings: Click to restore the default settings. All configuration changes you
have made will be lost.
3.7.3 Firmware
You can upgrade your WRT-410 with new firmware in this screen. Please follow these instructions:
1. Download the latest firmware from PLANET's website, and save it to your disk.
2. Click “Browse” and find out the location of the downloaded file.
3. Select the file and click “Upgrade” to update WRT-410 to the latest firmware.
3.7.4 Ping Test
You can ping an IP address or host which is present on the Internet. Type the IP address or host name in
the field and click Ping.