Invacare WALKING TUTOR WT 200 - Manual (Page 5)

Part No 1141439 5 Walking Tutor
FIGURE 4 Assembling the Armrest to Walking Tutor
Adjusting the Armrest
NOTE: For this procedure, refer to FIGURE 4.
Height
1. Loosen and pull out the armrest adjustment knob.
2. Raise or lower armrest to one of the four height adjustment holes that best fits the
patient.
3. Tighten the armrest adjustment knob.
Angle
1. Loosen and pull out the armrest adjustment knob.
2. Position the armrest to one of the seven angle adjustment holes (not shown) that best
fits the patient.
3. Tighten the armrest adjustment knob.
Depth
1. Loosen the lever.
2. Slide the armrest assembly to the desired depth.
3. Tighten the lever.
Hand Grip Distance
1. Loosen the hand grip adjustment knob.
2. Slide the hand grip to the desired position.
3. Tighten the hand grip adjustment knob.
Lever
Walking
Tutor Arm
Armrest
Assembly Tube
Armrest
Adjustment Knob
Height Adjustment Holes
Hand Grip
Hand Grip
Adjustment Knob
Armrest