Insignia IS-EDPLTV42 - Manual (Page 29)

28
IS-EDPLTV42 42-inch ED TV
www.insignia-products.com
Remote control
Maintenance
Use a dust cloth to clean the exterior of your ED TV. Use caution
when cleaning or wiping plastic parts. If necessary, use a cloth lightly
dampened with mild soap and water to clean the exterior. Do not use
abrasive cleaners or solvents because they may damage your ED TV.
Legal
FCC STATEMENT
FCC N OTICE
CLASS B DIGITAL DEVICE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
Symptom Possible cause Possible solution
Remote
control does
not operate. The remote control is not
aimed at the sensor. Aim the remote control at
the Remote sensor.
Distance is too far or too
much light in the room. Operate within 23 feet or
reduce the light in the room.
There is an obstacle in the
path of the beam. Clear the path of the beam.
The batteries are weak. Replace the batteries.
The batteries are not
inserted correctly. Insert correctly.
The wrong input source may
be selected. Press TV1 to control your
ED TV.
Warning To prevent fire or shock hazard, disconnect your ED TV from the
AC power source when you clean your TV.