Assembly instruction, Diagram 1 – Impex MWB-356 User Manual

Page 6

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches

NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.

STEP 1 (See Diagram 1)

A.) Plug the two Stabilizer End Caps (#23) onto the bottom of the two Rear Upright

Beams (#1).

B.) Connect the two Rear Upright Beams by a Cross Brace (#2) in the Mid-span. Secure

them with two M10 x 3 1/8” Carriage Bolts (#26), one Curved Bracket (#3), two

∅

¾”

Washers (#32), and two M10 Aircraft Nuts (#35) on each end of the Cross Brace.

C.) Insert the Backrest Adjustment Bar (#4) through a selected hole to obtain desired

incline of Backrest.

DIAGRAM 1