IMC Networks IE-IMCV-T1-MUX/4 User Manual
Page 6
2
The IE-iMcV-T1-Mux/4 + Ethernet offers the following features:
• Four T1 ports with RJ-48 connectors
• One full bandwidth Ethernet 10/100BaseT port (specific model)
• 1+1 protection switching via two SFP-based optical ports (specific model)
• DDMI supported on SFP ports
• One end-to-end serial RS-232 port on an RJ-45 connector, supporting up to 120K
baud rate
• Local CLI management console port on a Mini Jack connector
• Remote management capability through iMediaChassis series with SNMP
Management
• AIS generation on signal loss on all T1 interfaces
• SNMP Alarm TRAP reporting in managed chassis
• AutoCross for the Ethernet port
• Last Gasp on remote power loss
• Supports all MSA-compliant SFPs, 155mpbs
• Link Fault Pass-Through (LFPT)
• Bandwidth control, 10/100 Frc/Adv, Flow Control, FXLL
The IE-iMcV-T1-Mux/4 + Ethernet module is a dual-wide iMcV module.
Compatible chassis include the following:
• iMediaChassis series
• MediaChassis series (2 slot models )
• IE-MediaChassis series (2 slot models)