Pocket beep operation – Icom IC-V85-T User Manual
Page 54
41
9
SUBAUDIBLE TONES
■
Pocket beep operation
This function listens for subaudible tones and can be used as
a “common pager” to inform you that someone has called
when you were away from the transceiver.
D
Waiting for a call from a specific station
q Set the operating frequency.
w Set the desired CTCSS tone frequency or DTCS code in
SET MODE
.
• See p. 40 for programming details.
e Push
[FUNC]
, then push
[
TONE
]
(1).
• Repeat several times until “ ” appears when CTCSS, or “ ” ap-
pears when DTCS is selected.
r Push
[FUNC]
, then push
[
P
.
BEEP
]
(2) to activate the pocket
beep function.
• “ ” appears.
t When a signal with the matching tone is received, the
transceiver emits beep tones and blinks “ .”
• Beep tones sound for 30 sec. and “ ” blinks. To stop the beeps
manually, push any key. “ ” continues blinking until step y is
operated.
y Push
[PTT]
to answer.
• “ ” disappears and cancels the pocket beep function automati-
cally.
CTCSS
DTCS
Push
P.BEEP
2
FUNC
A
CTCSS
DTCS
Push
TONE
1
FUNC
A
CTCSS
DTCS
D