Removing the cylinder (figure 4) – Invacare IRC5LXO2 User Manual

Page 66

Text mode
Original mode

PART

TWO

PROCEDURE 3

COMPRESSOR OPERATION

REMOVING THE CYLINDER (FIGURE 4)

WARNING

DO NOT modify ANY connections on the HomeFill II

compressor. NEVER use tools of any kind to connect or

disconnect the cylinder and the compressor. Otherwise,

severe injury and/or damage may occur.

NOTE: Refer to the GENERAL WARNINGS and the HANDLING WARNINGS

in PROCEDURE 1 of this manual.
1. Press the compressor power switch to the OFF position.
2. Grasp the outer ring of the fillport connector and PULL DOWN.
3. Lift up on the cylinder to remove from the fillport connector.
4. Perform one (1) of the following steps:

A. If desired, fill another cylinder. Refer to the COMPRESSOR

OPERATION CHECKLIST in this instruction sheet.

B. Place the fillport connector cover onto the fillport connector.

NOTE: The fillport connector cover should be used whenever cylinders are not

being filled.