Insignia NS-DPF7G User Manual
Page 11

12
NS-DPF7G/NS-DPF9G
www.insigniaproducts.com
4
Extend the stand from the back of the frame, then place
the frame on a flat surface. Adjusting the stand changes
the frame’s viewing angle.
5
Slide the power switch to the
ON
position. The frame
automatically turns and starts playing a slideshow of the
pictures stored in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control at the
front of the frame and press
ENTER.
Tip
You can also disable and re-enable Demo mode
from the Setup menu. For instructions, see “Setup
NS-DPF7G-DPF9G_10-0658_MAN_ENG_V5.fm Page 12 Tuesday, June 15, 2010 10:09 AM
This manual is related to the following products: