5 model type conversion, 6 system racks, 5 model type conversion 1.6 system racks – IBM P5 570 User Manual
Page 24
![background image](/manuals/126536/24/background.png)
12
p5-570 Technical Overview and Introduction
Table 1-8 Value Pak configuration
1.5 Model type conversion
Customers who own an IBM pSeries 650 system may convert their system to an
IBM
Sserver
p5 570 system. System hardware for the new model will consist of one or more
drawers to replace the old system chassis. Supported features from the old model will be
transferred to the new system.
Model conversions allow any valid number of processors in the new model, regardless of the
number of processors in the old model. The valid processor quantities are 2, 4, 8, 12, and 16.
Any supported memory and disk drive features that are transferred from the previous system
can be counted toward the requirements for no additional charge processor activations, using
the same Value Pak rules that apply to new system orders. The p5-570 primary building block
retains the serial number of the older IBM pSeries 650. Upon completion, the previous IBM
pSeries 650 system will be returned to IBM. Parts that are removed or replaced become the
property of IBM. Supported features cannot be ordered on the converted model, but they can
be left on or removed from the converted model.
1.6 System racks
The Enterprise Rack Models T00 and T42, which are 19 inches wide, are general-use racks
with IBM
Sserver
p5, pSeries, and RS/6000 rack-based or rack drawer–based systems.
The racks provide increased capacity, greater flexibility, and improved floor space utilization.
The p5-570 uses a 4U rack-mounted server drawer as its basic building block. If a rack is
ordered without a door, an enhanced front trim kit (FC 6246 for the T00, or FC 6247 for the
T42) provides the additional clearance that is required for the p5-570 bezel.
If an IBM
Sserver
p5 system is to be installed in a non-IBM rack or cabinet, you should
ensure that the rack conforms to the EIA
3
standard EIA-310-D. (See 1.6.6, “OEM rack” on
Value
Paks
Processors, FC
Building
blocks
Memory (MB), FC
Disk
1.5 GHz
2-way, 7834 x 1
1
4096 MB, 4452 x 2
2x73.6 GB (FC 3274)
1.5 GHz
4-way, 7834 x 2
1
8192 MB, 4452 x 4
2x73.6 GB (FC 3274)
1.5 GHz
8-way, 7834 x 4
2
16384 MB, 4452 x 8
2x73.6 GB (FC 3274)
1.65 GHz
2-way, 7830 x 1
1
4096 MB, 4452 x 2
2x73.6 GB (FC 3274)
1.65 GHz
4-way, 7830 x 2
1
8192 MB, 4452 x 4
2x73.6 GB (FC 3274)
1.65 GHz
8-way, 7830 x 4
2
16384 MB, 4452 x 8
2x73.6 GB (FC 3274)
1.9 GHz
4-way, 7832 x 2
1
8192 MB, 4452 x 4
2x73.6 GB (FC 3274)
1.9 GHz
8-way, 7832 x 4
2
16384 MB, 4452 x 8
2x73.6 GB (FC 3274)
1.9 GHz
16-way, 7832 x 8
4
32768 MB, 4452 x 16
2x73.6 GB (FC 3274)
1.9 GHz
4-way, 7833 x 2
1
8192 MB, 7892 x 4
2x73.6 GB (FC 3274)
1.9 GHz
8-way, 7833 x 4
2
16384 MB, 7892 x 8
2x73.6 GB (FC 3274)
1.9 GHz
16-way, 7833 x 8
4
32768 MB, 7892 x 16
2x73.6 GB (FC 3274)