Impex CB-200 - Manual (Page 7)

A.) Attach the hole-side of Backrest Supports (#7) to the pivot on the Main Seat Support
(#3). Place the other end of Backrest Supports rest against the Backrest Adjustment
Bar (#11).
B.) Place the Backrest Board (#8) onto the Backrest Supports (#7). Secure it with four M6
x 1 5/8” Hex Bolts (#23) and
∅
½” Washers (#25).
C.) Place the Seat (#9) onto the Main Seat Support (#3). Secure it with four M6 x 5/8”
Philips Screws (#22) and
∅
½” Washers (#25).
DIAGRAM 3
6
STEP 4 (See Diagram 4)