Integra DHS-8.8 - Manual (Page 33)

Customizing the function settings
Group Setting Disc Details Page
Picture TV Shape
HD DVD DVD-Video DVD-RW DVD-R CD
To select a picture size according to the aspect
ratio of your TV. 34
Enhanced Black
Level
HD DVD DVD-Video DVD-RW DVD-R
To select the black level (0 IRE or 7.5 IRE). 34
RGB Output
Range HD DVD DVD-Video DVD-RW DVD-R To select the RGB range according to the
capacity of the connected DVI monitor. 35
Picture Mode
HD DVD DVD-Video DVD-RW DVD-R CD
To select the system of output signal
corresponding to playback source. (Only when
connected to a PROGRESSIVE TV.) 35
Resolution Setting
HD DVD DVD-Video DVD-RW DVD-R CD
To select the resolution of the player’s output,
according to the connected TV. 21
Audio Digital Out SPDIF
HD DVD DVD-Video DVD-RW DVD-R CD
To select the output sound format when
connecting the DIGITAL AUDIO OUTPUT jack. 23
Digital Out HDMI
HD DVD DVD-Video DVD-RW DVD-R CD
To select the output sound format when
connecting the HDMI OUT jack. 23
Digital Direct Audio
Mode
HD DVD
To output high bitrate audio to a connected
amplifier equipped with Dolby Digital Plus, Dolby
TrueHD or DTS-HD decoder. 35
Dynamic Range
Control
HD DVD DVD-Video DVD-RW DVD-R CD
To turn on or off a function that makes faint
sounds easier to hear even if you lower the
volume during late-hour playback. 35
Dialog Enhancement
HD DVD DVD-Video DVD-RW DVD-R CD
To turn on or off a function that increases dialog
volume of a disc playback. 36
Speaker Setting
HD DVD DVD-Video DVD-RW DVD-R CD
To select various parameters for the analog
5.1ch output. 24
Language Disc Menu Language
HD DVD DVD-Video DVD-RW DVD-R CD
To select a preferred language for disc menus. 36
Subtitle Language
HD DVD DVD-Video DVD-RW DVD-R CD
To select a preferred language for subtitles. 36
Audio Language
HD DVD DVD-Video DVD-RW DVD-R CD
To select a preferred language for the sound
track. 36
On Screen
Language
HD DVD DVD-Video DVD-RW DVD-R CD
To select a preferred language for on-screen
displays. 36
1
During stop, press Setup.
“SETUP MENU” appears.
2
Press / to select the group that contains a desired item, then
press OK.
3
Press / to select the setting item, then press OK.
4
Refer to the explanations on pages beginning from , to change
the selection by / or other buttons, then press OK.
5
Repeat step and 4 to set other items if necessary.
6
Press Setup.
“SETUP MENU” disappears and the setting is completed.
You can change the default settings to customize performance to your preference.
/+
3ETUP
4O
PREVIOUS
DHS-8.8_En.indb 33 2007/10/09 18:16:53