Intel, Server board scb2 specifications, Recommended configurations and order codes – Intel SCB2 User Manual

Page 6

All products, dates, and figures specified are preliminary based on current expectations, provided for planning purposes only, and are subject to change without notice. Availability in different channels may vary.
Information in this document is provided in connection with Intel

products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except

as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel

prod-

ucts including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for
use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
Intel, Intel logo, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.

Intel Literature Center: 1-800-548-4725

0901/SJ/DMW/MD/PP/15K

ORDER NUMBER 283951-001

Intel

Server Board SCB2 Specifications

Input/Output Features
PCI

Triple Peer PCI, up to six PCI slots on
risers in a 2U system

●

Bus A: 32-bit/33-MHz

●

Bus B: 64-bit/66 MHz

●

Bus C: 64-bit/66-MHz

IDE

One EIDE channel for a total of two IDE
devices

USB

Two stacked USB connectors

Serial ports

External RJ45 serial, Internal COM1 header

Floppy Controller

1.44 MB, 2.88 MB, 3-mode support

Keyboard/Mouse

PS/2, 8240A-compatible

Server Management Features

Remote Management

Remote access to system status, logs,
configuration data, and utilities–without
a remote management card

Event filtering and alerting through
proactive LAN and mobile devices

System Monitoring

System health indicators and corrective

and Auto-recovery

actions including:

●

Automated power cycling

●

OS watchdog timer

●

Fault-resilient booting

Server Troubleshooting Continuous health monitoring, text

console redirection, and error logs

Operating Systems

Microsoft* Windows* 2000, Microsoft*

Supported

Windows NT*, Red Hat* Linux*, SCO
UnixWare*, and Novell* NetWare*

System BIOS

BIOS Type

8 MB Flash EEPROM with AMI* BIOS,
Multi-boot BBS (BIOS Boot Specification)
1.4-compliant

Special Features

Plug and Play, IDE drive auto-configure,
SMBIOS 2.3, ECC/Parity support,
multilingual support

Configuration Utilities

System Set-up Utility (SSU) enables
easy system setup of BIOS and utilities,
Plug and Play

Processor/Cache

Processors Supported

Intel

Pentium

III processors with up to

512-KB of integrated L2 cache.

For the latest processor support, visit:

http://support.intel.com/support/
motherboards/server

System Memory

Memory Capacity

Six DIMM sockets for up to 6 GB of PC133
SDRAM (64 MB to 1 GB DIMMs supported;
memory must be populated in pairs)

Memory Type

PC/133 registered SDRAM 72-bit ECC,
168-pin gold-plated DIMMs

DIMM Sizes

64 MB,128 MB,256 MB, 512 MB, 1 GB

Memory Voltage

3.3V only

Error Detection

Corrects single-bit errors, detects
double-bit errors (using ECC memory)

Integrated On Board

Chipset

ServerWorks*Enterprise ServerSet*III HE SL

Ultra160 SCSI Controller Adaptec* AIC7899 Dual Channel—two

Ultra160/LVD channels (connect via one
internal 68-pin wide connector, and one
68-pin high-density external SCSI
connector)

Maximum data transfer: 160 MB/sec
on each Ultra160/LVD channel

ATA/100 RAID Controller Promise Technologies*PDC20267 ATA/100

IDE RAID controller provides two channels
of ATA/100 IDE that can be configured
into either RAID level 0 or RAID level 1

Maximum data transfer:100 MB/sec
on each ATA/100 channel.

Intel

Server Adapter

Two Intel

PRO/100+ Fast Ethernet

Controllers (Intel

82550PM)

Supports 10BASE-T and 100BASE-TX,
RJ45 output

Graphics

ATI* Rage* XL SVGA PCI video controller
with 8 MB of video memory

Super I/O Controller

National* PC97317*

For the most current product information on Intel server building blocks, visit:

www.intel.com/go/serverbuilder

Jumpers and Front Panel Connectors

Front Panel Connectors Power LED, power on/off switch, reset

Jumpers

CMOS clear, password clear, BMC boot
write protect, BIOS recovery

Mechanical

Server Board Style

SSI Thin E-Bay

Server Board Size

12" x 13"

Server Board Power Requirements

+5V

7.06A maximum continuous current

+5V standby

1.54A minimum continuous current

+12V

5.0A maximum continuous current

+3.3V

12.0A maximum continuous current

-5V

0 maximum continuous current

-12V

0.25A maximum continuous current

Environment

Ambient Temperature

Operating (system): 10°C to +35°C
Non-operating/storage (system):
-40°C to +70°C ambient

Relative Humidity

Non-operating: 95%, non-condensing
@ 30°C

Product Regulations

Safety Compliance:

UL/CUL 950-CSA 950 (UL
Recognition Mark)

Europe/Russia

EN60950; CE Mark-EU Directive
73/23/EEC; GOST-R Mark

International

IEC60950

EMI Verification—

configured in a compatible

Intel host system

U.S.

Verified to FCC, Class A

Canada

Verified to ICES-003, Class A

Europe/Russia

Verified to EN55022 (Class A) and
EN55024 (CE Mark—EU Directive
89/336/EEC)/GOST-R Mark

International/Japan

Verified to CISPR-22/VCCI, Class A

Australia/New Zealand Verified to AS/NZS 3548, Class A

(C-tick Mark)

1. Full utilization of some server management features is dependent on the use of an Intel

server chassis.

2. Environment ambient temperature is the system intake measurement for an Intel

Server Board SCB2 installed in an Intel

Server Chassis SR1200.

3. Compatible host system denotes the system(s) with which Intel tested the board and found it compliant.
4. See

http://support.intel.com

for a complete list of Intel and third-party compatible chassis.

5. The order code listed is for a chassis with an AC power supply. See

www.intel.com/go/serverbuilder

for ordering information with respect to the –48V DC power supply.

6. See

http://support.intel.com

for a complete list of validated Intel and third-party adapter cards.

1U System with Integrated SCSI

1U System with

2U System with Integrated SCSI

2U System with

Integrated ATA/100 RAID

Integrated ATA/100RAID

Intel

Server Board SCB2

SCB2SCSI

SCB2ATA

SCB2SCSI

SCB2ATA

Intel

Server Chassis SR1200 (1U rack)

KCR

KSN

Reference Chassis only

or SR2200 (2U rack)

Chassis Backplane (required)

BCR1USBPWB

BCR1UABPWB

Included with chassis

—

Redundant Power Module (optional)

N/A

AXX2PSMODL350

—

Sliding Rails (optional)

AXX1U2URAIL

—

CD-ROM/Floppy Module (optional)

AXXCDFLOPPY

—

Locking Bezel (optional black or beige)

ACRBEZBLACK or ACRBEZBEIGE

ASNBEZBLACK or ASNBEZBEIGE

—

ICMB Board Assembly (optional)

AXX2ICMBKIT

RJ45 to DB9 Serial Connector Converter

AXXRJ45DB9

Chassis Spares Kits

FCRSPRKIT

FSNSPRKIT

—

Intel

RAID Controller SRCMR (modular ROMB)

SRCMR

—

SRCMR

—

Intel

Server RAID Controller SRCU31L (low profile)

—

SRCU31L

—

SRCU31L

Intel

PRO/1000 XT Server Adapter (low profile)

PWLA8490XTL

Recommended Configurations and Order Codes

The following table provides several suggested configurations for 1U and 2U systems. Please visit

www.intel.com/go/serverbuilder

for the most recent product updates.