Playing tv audio only – Insignia NS-L47Q09-10A User Manual

Page 22

NS-L47Q09-10A Insignia 47" LCD TV

www.insigniaproducts.com

5 Press to highlight an option, then press

OK/ENTER to access the sub-menu. You can
select:

• Equalizer (set to Off )—You can adjust the

following options by pressing or to select
the option:

• Treble—Adjusts high frequency sound.
• Bass—Adjusts low frequency sound.
• SRS TruSurround HD—Provides the

ultimate home theater sound solution. You
can select On or Off.

• Equalizer (set to On)—You can adjust the

following options by pressing or to select
the option:

• Equalizer Mode—Selects the equalizer

mode. You can select Custom, Standard,
Theater, Music, and News. Press
OK/ENTER after you make your selection.

• Equalizer Settings—Sets the equalizer

frequency. You can select 120Hz, 500Hz,
1.5kHz, 5kHz, or 10kHz.

Press

adjust the settings. Press or

to switch

between columns. Press MENU to confirm
the settings.

You can adjust the following options regardless of
the Equalizer setting:

• Balance—Adjusts the sound between the left

and right speakers.

• Digital Audio/SPDIF—Sends digital audio to

an external audio system. You can select RAW
or PCM.

• MTS/SAP—Selects the sound mode (for

analog channel only).

• Mono—Produces a clearer sound if stereo

sound is difficult to hear.

• Stereo—Produces dynamic stereo sound

for sporting events and concerts.

• SAP—Selects a second language, weather,

or added commentary, if available.

• Audio Language—Selects the audio

language based on the languages supported
by a DTV channel.

• Auto Volume—Automatically adjusts volume

to be consistent across programs and
channels. You can select On or Off.

• Reset Audio Settings— Resets all audio

settings to factory defaults. When you select
this option, a confirmation box opens. Press
or

to select Yes or No, then press OK/ENTER

to confirm.

6 Press or

to modify a scale or to move from

left to right to make a choice in a submenu.
Press or to move up or down when
selecting from a list of choices in a submenu.)

7 Press MENU to go to the previous menu or EXIT

to close the menu.

Playing TV audio only

When watching TV, you can turn off the TV picture
and listen to the audio only.

To play TV audio only:

1 Press MENU. The on-screen menu opens with

the Picture menu displayed.

2 Press or

to select CHANNELS. The Channels

menu opens.

3 Press

highlight

Audio Only, then press

OK/ENTER or

to access the sub-menu.

4 Press

select

On or Off.

Note

If SRS TruSurround HD is set to On and you set
Equalizer to On again, SRS TruSurround HD will be
set to Off automatically.

Note

•

It takes about 3 seconds after the menu closes
and the picture disappears before the audio
plays.

•

Audio Only works only when the input source is
TV and your TV is receiving a broadcast signal.

•

To exit Audio Only mode, press any button.
When you exit Audio Only mode, the Audio
Only option is automatically reset to Off.

Picture

Mode

Brightness

Contrast

Color

Tint

PICTURE

AUDIO

CHANNELS

SETTINGS

MOVE

SELECT

EXIT

Adjust settings to affect picture quality

Vivid

Sharpness

MENU

EXIT

ENTER

Channels

Auto Channel Search

Add/Skip Channels

Favorites

Channel Labels

Channel Strength