Intel SSDSA1MH080G1 - Manual (Page 24)

Intel ® X18-M/X25-M SATA SSD
Intel ® X18-M/X25-M SATA Solid State Drive
Product Manual May 2009
24 Order Number: 319765-008US
Intel ® X18-M/X25-M SATA SSD
6.1.6 48-Bit Address Command Set
The Intel X18-M/X25-M SATA SSDs support the 48-bit Address command set, which
consists of
• FLUSH CACHE EXT
• READ DMA EXT
• READ NATIVE MAX ADDRESS EXT
• READ SECTOR(S) EXT
• READ VERIFY SECTOR(S) EXT
• SET MAX ADDRESS EXT
• WRITE DMA EXT
• WRITE MULTIPLE EXT
• WRITE SECTOR(S) EXT
6.1.7 Device Configuration Overlay Command Set
The Intel X18-M/X25-M SATA SSDs support the Device Configuration Overlay command
set, which consists of
• DEVICE CONFIGURATION FREEZE LOCK
• DEVICE CONFIGURATION IDENTITY
• DEVICE CONFIGURATION RESTORE
• DEVICE CONFIGURATION SET
6.1.8 General Purpose Log Command Set
The Intel X18-M/X25-M SATA SSDs support the General Purpose Log command set,
which consists of
• READ LOG EXT
• WRITE LOG EXT
6.2 SATA Commands
The SATA 2.6 specification is a super set of the ATA/ATAPI-7 specification with regard to
supported commands. The Intel X18-M/X25-M SATA SSDs support the following
features that are unique to the SATA specification.
6.2.1 Software Settings Preservation
The Intel X18-M/X25-M SATA SSDs support the SET FEATURES parameter to enable/
disable the preservation of software settings.