iHome IA17 - Manual (Page 10)

This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns
the unit off. It will also turn off a docked iPhone or iPod, but will NOT turn off an audio device connected via the Aux
Line-in jack, so avoid line-in as a sleep source..
1. Press and release the Bedtime Button as needed to cycle to the desired sleep setting: 90, 60, 30, 15 minutes
or Off (cancels sleep mode).
2. To set sleep volume, press the or Buttons. Sleep volume does not effect normal or alarm volume settings.
3. During sleep mode, press the Bedtime Button to view the sleep time remaining. Press again to set sleep to the
next lowest setting.
Tip: Use the iHome+Sleep app to enjoy expanded and custom bedtime settings
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,
and Off brightness settings. Settings affect both the display and cabinet LED.
7
Color Change Mode
There are 5 color settings, which affect both the cabinet and the display. Press the Color Button to cycle through them.
The settings are:
• SLO Slow color change (default): Colors slowly blend continually from one color into the next
• colr As the color spectrum cycles, select a fixed color by pressing the Color Button when the desired
color is showing
• PULS Colors change in time to the beat, creating a pulse effect
• FAST Fast color change: colors blend quickly from one to another through the color spectrum
• none Turns off cabinet color effect and sets display to default color.
Dimmer Mode
Bedtime Sleep Mode