InFocus XS1 - Manual (Page 6)

Introduction 6
Controls and functions
Projector
1. Focus ring
Adjusts the focus of the projected
image. See
"Fine-tuning the image
clarity" on page 29 for details.
2. TEMPerature warning light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 56 for details.
3. POWER indicator light
Lights up or flashes when the projector
is under operation. See
"Indicators" on
page 56 for details.
4. Power
Toggles the projector on or off.
See
"Starting up the projector" on page
22 and "Shutting down the projector"
on page 42 for details.
5. Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD
menu, exits and saves menu settings.
See
"Using the menus" on page 23 for
details.
6. Left
Selects the desired menu items and
makes adjustments.
7. BLANK
Used to hide the screen image. See
"Hiding the image" on page 40 for
details.
8. LAMP indicator light
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem. See
"Indicators"
on page 56 for details.
9. Keystone/Arrow buttons ( / Up,
/ Down)
Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page 30
for details.
10. AUTO
Automatically determines the best
picture timings for the displayed image.
See
"Auto-adjusting the image" on
page 29 for details.
11. Right/
Activates panel key lock. See "Panel
Key Lock" on page 47 for details.
When the On-Screen Display (OSD)
menu is activated, the #6, #9, and #11
buttons are used as directional arrows
to select the desired menu items and to
make adjustments. See
"Using the
menus" on page 23 for details.
12. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 27 for
details.
13. Mode/Enter
Selects an available picture setup
mode. See
"Selecting a picture mode"
on page 33 for details.
Enacts the selected On-Screen Display
(OSD) menu item.
See "Using the
menus" on page 23 for details.
1
4
5
6
7
9
10
11
12
3
2
8
9
13
I I